|
Oak Grilles & Registers
|
 |
Original Style
Flush With Frame Model |
 |
|
The original design is engineered to satisfy the demands
of professional floor layers. Each vent is built oversized to cover a
standard adjustable metal register installed on the subfloor. The essential
ability to control air flow is retained. The patented design allows flush
installation in a 3/4" floor. Fluted dowel construction. Each vent is
supplied with its own frame and complete installation and finishing
instructions. We strongly recommend using 12" vents on 10" duct openings for
optimal air flow. |
|
 |
Original Style
Flush No Frame Model |
 |
As the name implies, the same vent as the flush with frame
model less the frame. Without a frame, this unit satisfies two specific
needs:
1. Permits retrofitting in existing 3/4" floors by routing out an area the
size of the wood vent and re-installing the metal register on the subfloor;
2. Provides a less massive appearance than the framed model, and may be
trimmed even further by ripping up to 1/2" off each rail at the job site.
|
| |
|
 |
Click here for sizing
help.
Code Compliance
Original Style
Flush With Frame Model, Flush No Frame Model and Toe Kick Model meet current
B.O.C.A. codes M-305.6 and M-305.6.1 for air condition systems because the
patented design permits use of a standard metal register on the sub-floor, and
the wood vents do not come in contact with the heating system itself.
Call 1-800-685-8263 or e-mail us at
volkosupply@yahoo.com
|
Choose a link below to see specifications and sizes. Can be made custom
to any heating duct opening.
Available
in Oak, Maple, Cherry, Ash and many others. Click for
choices.
|
